dmp h 401 5 sk3 document number: ds 37 425 rev. 1 - 2 1 of 7 www.diodes.com october 2015 ? diodes incorporated dmp h4015sk3 n ew product 175c p - channel enhancement mode mosfet product summary v (br)dss r ds( on ) max i d t c = + 25 c - 40 v 11 m ? @ v gs = - 10 v - 4 5 a 1 5 m ? @ v gs = - 4.5 v - 4 0 a description this new generation mosfet is designed to minimize the on - state resistance (r ds( on ) ) and yet maintain superior switching performance, making it ideal for high efficiency power management applications. applications ? dc - dc converters ? power m anagement f unctions ? backlighting features and benefits ? rated to +175c C ideal for high ambient temperature environments ? 100% unclamped inductive switch (uis) t est in p roduction ? low o n - resistance ? fast s witching s peed ? lead - free finish; rohs c ompliant (note s 1 & 2 ) ? halogen and antimony free. green device (note 3 ) ? qualified to aec - q101 standards for high r eli ability mechanical data ? case: to252 ? case material: molded plastic, green molding compound. ul flammability classification rating 94v - 0 ? moisture sensitivity: level 1 per j - std - 020 ? terminal connections: see diagram ? terminals: finish C matte tin finish a nnealed over copper l eadframe. solderable per mil - std - 202, method 208 ? weight: 0. 33 grams ( a pproximate) ordering information (note 4 ) part number case packaging dmp h4015 sk3 - 13 to252 2 , 5 00/tape & reel notes: 1. eu directive 2002/95/ec (rohs) & 2011/65/eu (rohs 2) compliant. all applicable rohs exemptions applied. 2. see http://www.diodes.com/quality/lead_free.html for more information about diodes incorporateds definitions of hal ogen - and antimony - free, "green" and lead - f ree . 3. halogen - and antimony - free "green products are defined as those which contain <900 ppm bromine, <900ppm chlorine (<1500ppm total br + cl) and <1000ppm antimony compounds. 4 . for packaging details, go to our website at http : //www.diodes.com/products/packages.html . marking information equivalent circuit top view pin - out top view to252 yyww h4015 s . = manufacturers marking h4015 s = product type marking code yyww = date code marking yy = year (ex: 1 5 = 20 15 ) ww = week (01 - 53) g s d d green e3 d s g
dmp h 401 5 sk3 document number: ds 37 425 rev. 1 - 2 2 of 7 www.diodes.com october 2015 ? diodes incorporated dmp h4015sk3 n ew product maximum ratings ( @ t a = + 25c , unless otherwise specified .) characteristic symbol value units drain - source voltage v dss - 4 0 v gate - source voltage v gss 25 v continuous drain current (note 6 ) v gs = - 10 v steady state t c = +25c t c = + 10 0 c i d - 45 - 3 5 a steady state t a = +25c t a = + 10 0 c i d - 14 - 10 a pulsed drain curren t ( 10 ? dm - 100 a maximum body diode forward current (note 6 ) i s - 5.5 a avalanche current , l = 1mh (note 7 ) i a s - 22 a avalanche energy , l = 1mh (note 7 ) e a s 260 mj thermal characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol value units total power dissipation (note 5 ) p d 1.7 w thermal resistance, junction to ambient (note 5 ) s teady s tate r ? ja 73 c/w total power dissipation (note 6 ) p d 3. 3 w thermal resistance, junction to ambient (note 6 ) s teady s tate r ? ja 3 8 c/w thermal resistance, junction to case r ? j c 1.0 operating and storage temperature range t j, t stg - 55 to +1 75 c electrical characteristics (@ t a = +25c, unless otherwise specified.) characteristic symbol min typ max unit test condition off characteristics (note 8 ) drain - source breakdown voltage bv dss - 4 0 ? ? gs = 0v, i d = - 250 a zero gate voltage drain current i dss ? ? ? ? a v ds = - 4 0 v, v gs = 0v gate - source leakage i gss ? ? ? gs = ? ds = 0v on characteristics (note 8 ) gate threshold voltage v gs( th ) - 1 .5 - 2 - 2 . 5 v v ds = v gs , i d = - 250 a static drain - source on - resistance r ds(on) ? ? ? gs = - 10 v, i d = - 9.8 a ? gs = - 4 .5v, i d = - 9.8 a diode forward voltage v sd ? gs = 0v, i s = - 1 a dynamic characteristics (note 9 ) input capacitance c iss ? ? ds = - 20 v, v gs = 0v f = 1mhz output capacitance c oss ? ? rss ? ? g ? ? ? ? ? ds = 0 v, v gs = 0v , f = 1mhz total gate charge ( v gs = - 4. 5 v ) q g ? ? ? ds = - 20 v, i d = - 9.8 a total gate charge ( v gs = - 10 v ) q g ? ? gs ? ? gd ? ? d( on ) ? ? gs = - 10 v, v dd = - 20v , r g = 6 ? d = - 1 a turn - on rise time t r ? ? d( off ) ? ? f ? ? ? ? rr ? ? f = - 9.8 a, di/dt = - 10 0a/ s reverse recovery charge q rr ? ? f = - 9.8 a, di/dt = - 10 0a/ s notes: 5. device mounted on fr - 4 substrate pc board, 2oz copper, with minimum recommended pad layout. 6. device mounted on fr - 4 substrate pc board, 2oz copper, with 1inch square copper plate. 7. i a s and e a s rating are based on low frequency and duty cycles to keep t j = + 25c . 8 . short duration pulse test used to minimize self - heating effect. 9 . guaranteed by design. not subject to product testing.
dmp h 401 5 sk3 document number: ds 37 425 rev. 1 - 2 3 of 7 www.diodes.com october 2015 ? diodes incorporated dmp h4015sk3 n ew product 0.0 5.0 10.0 15.0 20.0 25.0 30.0 0 0.4 0.8 1.2 1.6 2 i d , drain current (a) v ds , drain - source voltage (v) fig ure 1. typical output characteristic v gs = - 2.5v v gs = - 3.0v v gs = - 3.5v v gs = - 4.0v v gs = - 4.5v v gs = - 5.0v v gs = - 10.0v 0 4 8 12 16 20 1 1.5 2 2.5 3 3.5 4 i d , drain current (a) v gs , gate - source voltage (v) figure 2. typical transfer characteristic v ds = - 5.0v t a = - 55 o c t a = 25 o c t a = 85 o c t a = 125 o c t a = 150 o c t a = 175 o c 0.004 0.006 0.008 0.010 0.012 0.014 0 5 10 15 20 25 30 r ds(on) , drain - source on - resistance ( ? d , drain - source current (a) figure 3. typical on - resistance vs. drain current and gate voltage v gs = - 4.5v v gs = - 10.0v 0 0.005 0.01 0.015 0.02 0.025 0.03 0 5 10 15 20 25 r ds(on) , drain - source on - resistance ( ? ) v gs , gate - source voltage (v) figure 4. typical transfer characteristic i d = - 9.8a 0.006 0.008 0.01 0.012 0.014 0.016 0.018 0 5 10 15 20 25 30 r ds(on) , drain - source on - resistance ( ? d , drain current (a) figure 5. typical on - resistance vs. drain current and temperature v gs = - 4.5v t a = - 55 o c t a = 25 o c t a = 85 o c t a = 125 o c t a = 150 o c t a = 175 o c 0.6 0.8 1 1.2 1.4 1.6 1.8 - 50 - 25 0 25 50 75 100 125 150 175 r ds(on) , drain - source on - resistance (normalized) t j , junction temperature ( gs = - 10v, i d = - 9.8a v gs = - 4.5v, i d = - 9.8a
dmp h 401 5 sk3 document number: ds 37 425 rev. 1 - 2 4 of 7 www.diodes.com october 2015 ? diodes incorporated dmp h4015sk3 n ew product 0.004 0.006 0.008 0.01 0.012 0.014 0.016 0.018 0.02 - 50 - 25 0 25 50 75 100 125 150 175 r ds(on) , drain - source on - resistance ( ? j , junction temperature ( gs = - 10v, i d = - 9.8a v gs = - 4.5v, i d = - 9.8a 1 1.2 1.4 1.6 1.8 2 2.2 - 50 - 25 0 25 50 75 100 125 150 175 v gs(th) , gate threshold voltage (v) t j , junction temperature ( d = - 1ma i d = - 250 a 0 5 10 15 20 25 30 0 0.3 0.6 0.9 1.2 1.5 i s , source current (a) v sd , source - drain voltage (v) figure 9. diode forward voltage vs. current v gs = 0v t a = - 55 o c t a = 25 o c t a = 85 o c t a = 125 o c t a = 150 o c t a = 175 o c 100 1000 10000 0 5 10 15 20 25 30 c t , junction capacitance (pf) - v ds , drain - source voltage (v) figure 10. typical junction capacitance f=1mhz c iss c oss c rss 0 2 4 6 8 10 0 20 40 60 80 100 120 v gs (v) q g (nc) figure 11. gate charge v ds = - 20v, i d = - 9.8a 0.1 1 10 100 1000 0.1 1 10 100 i d , drain current (a) v ds , drain - source voltage (v) figure 12. soa, safe operation area t j (max) =175 c =25 gs = - 4.5v r ds(on) limited p w =1s p w =100ms p w =10ms p w =1ms p w =100s p w =10s p w =1s
dmp h 401 5 sk3 document number: ds 37 425 rev. 1 - 2 5 of 7 www.diodes.com october 2015 ? diodes incorporated dmp h4015sk3 n ew product 0.001 0.01 0.1 1 1e - 06 1e - 05 0.0001 0.001 0.01 0.1 1 10 r(t), transient thermal resistance t1, pulse duration time (sec) figure 13. transient thermal resistance r jc (t)=r(t) * r jc r jc =2.5
dmp h 401 5 sk3 document number: ds 37 425 rev. 1 - 2 6 of 7 www.diodes.com october 2015 ? diodes incorporated dmp h4015sk3 n ew product package outline dimensions please see ap0200 2 at http://w ww.diodes.com/datasheets/ap0200 2 .pdf for the latest version. to252 (dpak) suggested pad layout please see ap02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version. to252 (dpak) dimensions value (in mm) c 4.572 x 1.060 x1 5.632 y 2.600 y1 5.700 y2 10.700 to252 (dpak) dim min max typ a 2.19 2.39 2.29 a1 0.00 0.13 0.08 a2 0.97 1.17 1.07 b 0.64 0.88 0.783 b2 0.76 1.14 0.95 b3 5.21 5.46 5.33 c 0.45 0.58 0.531 d 6.00 6.20 6.10 d1 5.21 - - e - - 2.286 e 6.45 6.70 6.58 e1 4.32 - - h 9.40 10.41 9.91 l 1.40 1.78 1.59 l3 0.88 1.27 1.08 l4 0.64 1.02 0.83 a 0 10 - all dimensions in mm b3 e l3 d l4 b2(2x) b(3x) e c a 7 1 h seating plane a1 gauge plane a 0.508 l 2.74ref d1 a2 e1 x1 x y2 y1 y c
dmp h 401 5 sk3 document number: ds 37 425 rev. 1 - 2 7 of 7 www.diodes.com october 2015 ? diodes incorporated dmp h4015sk3 n ew product important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other c hanges without further notice to this document and any product described herein. diodes incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does diodes incorporated convey any license unde r its patent or trademark rights, nor the rights of others. any customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diod es incorporated website, harmless against all damages. diodes incorporated do es not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. should customers purchase or use diodes incorporated products for any unintended or unauthorized application, customers shall indemni fy and hold diodes incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising ou t of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized applicat ion. products described herein may be covered by one or more united states, international or foreign patents pending. product nam es and markings noted herein may also be covered by one or more united states, international or foreign trademarks. this document is written in english but may be translated into multiple languages for reference. only the english version of this document is the final and determinative format released by diodes incorporated. life support diodes incorporated products are sp ecifically not authorized for use as critical components in life support devices or systems without the express written approval of the chief executive officer of diodes incorporated. as used herein: a. life support devices or systems are devices or sys tems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided i n the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support device or system whose failure to perform can be reasonably expe cted to cause the failure of the life support device or to affect its safety or effectiven ess. customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support d evices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety - related re quirements concerning their products and any use of diodes incorporated products in such safety - critical, life support devices or systems, notwithstanding any devices - or systems - related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporated and its representatives against any damages arising out of the use of diodes incorporated products in such safety - critical, life support devices or systems. copyright ? 201 5 , diodes incorporated www.diodes.com
|
